|
Triple Channel Cellular Gateway - Analogue Trunk Line
 Analogue line interface
Up to 3 cellular lines
Cellular Least Cost Routing (LCR)
Heavy-duty operation
Quick and easy installation
State-of-the-art technology, high audio quality
Compatible with GSM, CDMA, TDMA and AMPS networks
Quick return on investment
Compatible with all major brands of PBX
CelluLink 301 creates a direct connection between your office PBX and the cellular network. Three single analogue trunk lines on the office PBX are reserved as three cellular sending and receiving stations.
CelluLink 301 is an ideal corporate solution for offices maintaining a considerable volume of communication with cellular subscribers. Cellular calls from and to the fixed line telephone in your office bypass the PTT, using the CelluLink 301 gateway, eliminating any charges stemming from the use of its landline telephone network.
The result - savings on cellular communication costs from and to the office, capitalizing on special corporate airtime rates and off-peak hour tariffs.
Quasar also offers a module version of CelluLink 301.
CelluLink 301 is compatible with all cellular networks.
| Main Voltage |
110/230VAC, 60/50 Hz |
| Supply Voltage (secondary) |
9V-12VDC |
| Load current |
2 A max |
| Dial tone |
400Hz ± 15% |
| Trunk connector type |
RJ-11C or RJ-12 4/6 |
| DC supply connector type |
RCA (Internal positive) |
| Two-wire circuit: |
Tip/Ring |
| Voltage |
50 VDC nom |
| Current |
30 mA max |
| Ringer signal |
25 Hz, 120 Vp-p |
| Telephone dialing format |
DTMF |
| Dimensions (LxWxH) |
240x120x240mm |
| Environment conditions: |
|
| Operating temperature |
0°C to 50°C |
| Humidity |
5% to 95% |
| Regulations |
Full CE compliance |
| Network supported |
GSM, TDMA, CDMA, Analogue |
| External antenna (optional) |
FME connector |
 Open PDF file
| 
