LAN Phone 2000 is a full-featured IP-based tel set for office telephony via Ethernet base communication. Over the office LAN, it provides IP-PBX solution such as station-to-station call, IP call and local PSTN/PBX extension call via PSTN Gateway. The traditional PBX functionality is provided with H.450 features together with Gatekeeper or IP/PBX Call Manager. Two 10/100BaseT switch/hub RJ-45 ports allow connect to office LAN and PC on your table.  It interfaces with ADSL/Cable Modem, provided by ITSP, ISP or carrier to provide VoIP services to residential and SOHO application. An integrated Analog Phone features provides IP call or PSTN call selection. Or to be a POTS Telephone set when external power is failure. It provides programmable keys and feature buttons, an internal high-quality speakerphone with microphone mute, HOLD function, FORWARD and TRANSFER feature buttons. The LAN Phone 101 also provides a dot matrix of two lines 24 characters LCD display each. The display provides features such as date and time, calling party name, calling party number, and digits dialed. An LED associated with each feature and line buttons provides feature and line status. TELNET and LCD front panel provide local and remote configuration, Management and software download. By using this feature, ITSP/ISP provides centralized control, management and software upgraded remotely. Such as: IP/Gatekeeper addressing setting, dial plan, voice coder, Gatekeeper and Peer to Peer mode selection, QoS and call progress tone setting.

Application

ISP/ITSP (Internet Telephony Service Provider)    Multi-nation enterprise communication or SOHO Telephony      IP-PBX with office telephony services Phone to PC, Phone to Phone

Benefits

Cost Saving - Telephone call from VPN or public Internet Follows the existing telephone call dial plan Built-In two 10/100BaseT Switch/Hub Built-In analog line telephone function Provided IP call or PSTN call selection (Or) to be a Plain old Telephone set when external power is failure

Interface

Two 10/100BaseT Ethernet port with Switch/Hub inside One RJ-11 PSTN analog line interface Input Voltage 9Vdc (External AC input, DC output adaptor)

Features

Support ITU-T H.323 V2/V3/V4 protocol PPPoE (option) Behind NAT router or IP sharing device  Support both Fixed IP and DHCP Support H.235 security function Support Fast Start and H.245 Tunneling Provide H.450 services (Hold, Transfer, Forward) Multiple E.164 (line number) supported Automatically GateKeeper Discovery Alternate Gatekeeper selection Provide Peer-to-Peer Mode (Non Gatekeeper needed) selection 2 x 24 dot matrix LCD display Speaker phone and Handset operation Ring tone, Speaker and Handset volume adjustable 10 sets last number redial LCD Display: Time, Date, Caller ID, Call Duration 12 Number Keypads: 0 to 9, # and * 4 LCD operation keys: OK, C, LEFT and RIGHT 10 function keys for Memory dial or Multi-Line function 8 one touch function keys: Speaker, Redial, Mute, Hold, Transfer, Call Forward, PSTN, Message 5 LED display: PSTN, Message, Hold, Mute and Speaker Enter IP phone and Gatekeeper IP address from Keypads Configure Dial path selection; MS-NetMeeting v3.0 compatible Support QOS by setting TOS (Type Of Service) parameters of VoIP packet

Audio Performance

G.711 A/u-Law, G.723.1, G.729A, G.729 VAD, CNG; G.168/G.165 compliant echo cancellation Programmable Dynamic Jitter Buffer; Bad Frame Interpolation Completed voice band signaling support Provide both Inband and H.245 Outband DTMF generation/detection Gain/Attenuation Settings Provide Progress Tone: Dial tone, busy tone, call-holding tone and ring-back tone

Management Features

TFTP/FTP download Two easy ways for system configuration: LCD Front Panel TELNET

LED indicator for system status

SPEAKER: Speaker Phone working status  MESSAGE: Message indication LINK/ACT: 10/100BaseT status; HOLD: IP call put on hold indication MUTE: IP call is in Mute status PSTN: Selection between IP call and analog line call