|
Smart Standalone proximity access controller for single door use. Including keypad.
Features:
- Access control system with integral Proximity/RF/reader into one unit.
- Easy to install, low and designed for indoor or outdoor use.
- Proximity reader to send out Wiegand.
- With tamper switch and two loop sensor inputs to trigger alarm as case is tampered or loop is intruded.
- Programmable door release & monitoring time, error trials, alarm time.
- Reading range from 5 to 15 cm.
- Non-volatile EEPROM to store system parameters for 10 years.
- Allow 3000 cards capacity based and expand 9,999 cards capacity for Access control function.
- The Pegasus proximity readers are reading EM chip Pegasus PG-PROXC-DVP/44, PG-PROX-DVX/44 proximity card and PG-PROXKEY-D/44 proximity keyfob ... etc.
- LED indicator to show the operation status.
- With CPU watch-dog function to prevent malfunction.
Specifications:
| Model NO. |
PP-5878 |
| Dimensions |
120(L)x 83(W)x 30(H)mm |
| Weight |
0.45kg 5% |
| Frequency of Operation |
ASK 125KHz |
| Card holders |
3,000~9,999 cards |
| Type |
Surface mount, water proof |
| Monitor inputs |
Door contact, Exit push button, switch tamper |
| Operation temperature |
0 C ~ 50 C |
| Humidity |
20%~90% RH, Non condensation |
| Power supply |
12 V DC |
| Keypad |
With brief 3 x 4 membrane keypad for system programming and password entry |
| Baud rate |
4,800 bps, N.8.1 (optional for 300~19,200bps) |
| Interface |
RS-485 or Wiegand output or TTL(optional) |
Package content: 1 x access control
|