|
The DL50/K domestic loop amplifier kit
includes everything you need to create a high quality induction loop system
for a bedroom, living room, TV lounge or study. Carefully designed to sit discreetly
alongside all types of audio-visual equipment, the
amplifier features one set of phono inputs (for direct connection to television sets, etc), two
microphone inputs and an alert input (for connection to
fire alarms, doorbells, etc).
Screwdriver-adjustable drive, level, mix and tone
controls are provided, allowing
the system to be tailored to suit the exact requirements of
any room, with installation further aided
by the provision of an output current meter, an
input peak LED and an easy-to-follow installation
guide.
• Ideal for bedrooms, living rooms, TV lounges, studies and other
domestic applications
• Kit includes a DL50 induction loop amplifier c/w
plug-top power supply, 33m of loop cable*, a SCART-to-double-phono audio
connection lead and a microphone
• Attractively-designed amplifier provides
max. square room coverage of 50m2 (7m x 7m) or max. rectangular room coverage of
up to 100m2 (5m x 20m)*
• Connections provided for two 3.5mm electret
microphones (one mic. is provided in the DL50/K kit) and one
SCART-to-double-phono audio lead (alternative leads are available for purchase
if required)
• Simple to adjust, tamper-resistant drive, level, tone and mic.
priority controls
• Input peak, output current, signal present and power on
LEDs
• Alert tone input for doorbells, fire alarms, security systems,
etc.
• Automatic compressor limiter
• Full 2. drive current capability for
increased coverage at higher frequencies
• Fully compliant with EN60118-4
(formerly BS6083) and BS7594:1993
* Longer lengths of loop cable may be
required for rectangular rooms.
| DL50/K TECHNICAL
SPECIFICATION |
| POWER REQUIREMENTS
|
12V a.c. 1.5A max (via plug-top power
supply)
|
| MAX. COVERAGE AREA
|
50 square metres (7m x
7m)
|
| CONTROLS |
Input signal level control
Tone
control (boost +16dB; cut -20dB at 1KHz)
Loop signal control
Microphone
priority control
(all controls are screwdriver adjustable and recessed to
avoid tampering)
|
| INDICATORS |
Power on (green)
Input signal
(red)
Loop strength meter (green to yellow to red)
|
| INPUTS |
Two 3.5mm mono microphone inputs with
phantom power
Two phono (line level) inputs (for connection of the SCART to
double phono lead supplied)
Alert trigger input - normally open (close to
trigger)
|
| OUTPUTS |
One loop output (via push-and-hold
connector) - only use the loop cable supplied.
One headphone output (confirms
audio input signal level)
|
| DIMENSIONS |
40mm (Height); 85mm (Depth);185mm
(Width)
|
| WEIGHT |
550g (amplifier
only)
|
DL50-kit compromise:
- DL50 Free standing Loop Amplifier
- AMT microphone
- APS scart lead
- Loop cable
| 
