This economic and versatile alarm controller incorporates two protection zones and a built-in door chime, which is designed for shop, residence, mobile home and boat protections.
The two protection zones give instant and delayed responses for activating alarm. They are end of line (EOL) resistor supervision and are compatible with both normally open (N.O.) and normally closed (N.C.) sensor devices. The independent door chime is compatible with normally open (N.O.) door bell button(s), which works all the time after power is applied.
The operation of the delay zone is selectable to give chimes as visitor announcer or activate the siren as alarm when it is triggered.
Since the module comes with built-in speaker. It can work independently as a self-contained door chime and alarm system with minimum external components. It consumes very low standby power and is ideal for use as an integral part of a battery operated security system.
FEATURES
Two independent protection zones, one instant and one delay
Protection zones are End-Of-Line resistor supervised and accept both N.C. & N.O. sensors
Incorporates an independent door chime
The delay zone can be turned as visitor announcer
Remote arm-disarm by keyswitch or digital access keypad (optional)
System status indicated by an external LED
60 second exit delay, 30 second entry delay and a 3 minute auto reset siren timer
Siren output directly drives two 8-Ohm horn speakers
12V DC output relay contact energizes other device when alarm occurs
12V DC nominal, 12-16VDC operation, low standby power consumption
SPECIFICATIONS
Exit Delay
60 seconds
Entry Delay
30 seconds
Siren Duration
3 minutes
Siren Output
Drives two 8-Ohm horn speakers max.
Output Relay Contact
12V DC Output normally open 5-Amp relay contact. Selectable for LATCHED or TIMING operation
Sensing Terminals
One delayed zone and one instant zone - compatible with N.O. and N.C. sensor devices One 24 hour door chime terminal for N.O. Buttons
Built-in Chimes
1) Door Chimes 2) Pre-warning Chimes
Remote Arm-disarm
By optional keyswitch or digital access keypad
External Indications
System Status, EXIT Warning Flash and Alarm Memory
Power Requirement
12-16V DC
Quiescent Current
7mA approx. after system is armed
Dimensions
87(H) x 120(W) x 33(D)mm approx.
Weight
180g
* SPECIFICATIONS ARE SUBJECT TO CHANGE FOR MODIFICATION WITHOUT NOTICE
