|
AC-239
2-ZONE ALARM CONTROLLER WITH DOOR CHIME
 INTRODUCTION
This economic and versatile alarm controller incorporates two protection zones and a built-in door chime, which is designed for shop, residence, mobile home and boat protections.
The two protection zones give instant and delayed responses for activating alarm. They are end of line (EOL) resistor supervision and are compatible with both normally open (N.O.) and normally closed (N.C.) sensor devices. The independent door chime is compatible with normally open (N.O.) door bell button(s), which works all the time after power is applied.
The operation of the delay zone is selectable to give chimes as visitor announcer or activate the siren as alarm when it is triggered.
Since the module comes with built-in speaker. It can work independently as a self-contained door chime and alarm system with minimum external components. It consumes very low standby power and is ideal for use as an integral part of a battery operated security system.
FEATURES
- Two independent protection zones, one instant and one delay
- Protection zones are End-Of-Line resistor supervised and accept both N.C. & N.O. sensors
- Incorporates an independent door chime
- The delay zone can be turned as visitor announcer
- Remote arm-disarm by keyswitch or digital access keypad (optional)
- System status indicated by an external LED
- 60 second exit delay, 30 second entry delay and a 3 minute auto reset siren timer
- Siren output directly drives two 8-Ohm horn speakers
- 12V DC output relay contact energizes other device when alarm occurs
- 12V DC nominal, 12-16VDC operation, low standby power consumption
SPECIFICATIONS
| Exit Delay |
60 seconds |
| Entry Delay |
30 seconds |
| Siren Duration |
3 minutes |
| Siren Output |
Drives two 8-Ohm horn speakers max. |
| Output Relay Contact |
12V DC Output normally open 5-Amp relay contact. Selectable for LATCHED or TIMING operation |
| Sensing Terminals |
One delayed zone and one instant zone - compatible with N.O. and N.C. sensor devices
One 24 hour door chime terminal for N.O. Buttons |
| Built-in Chimes |
1) Door Chimes
2) Pre-warning Chimes |
| Remote Arm-disarm |
By optional keyswitch or digital access keypad |
| External Indications |
System Status, EXIT Warning Flash and Alarm Memory |
| Power Requirement |
12-16V DC |
| Quiescent Current |
7mA approx. after system is armed |
| Dimensions |
87(H) x 120(W) x 33(D)mm approx. |
| Weight |
180g |
* SPECIFICATIONS ARE SUBJECT TO CHANGE FOR MODIFICATION WITHOUT NOTICE
|
